Item Description
RUBBER CONVEYOR BELT
Polyester main conveyer belt is a multi-layer polyester canvas bonded with each other by a certain way, from top to bottom coverage of large toughness, great use-resistant versatile rubber, no particular corrosion for the transmission of little and medium-sized block, powder, granular and other resources.
1.CZPTs:
GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc
2.Features:
Good flexibility, groove formation property and cost-successful. It is mainly used to transport powder,small and medium granular or less wearing materials at common temperature.
three.Application:
Applicable to prolonged-length, higher capacity, large-pace shipping of materials below the problems.
Employed in mining, quarries, chemical plants, architectural sector and and many others.
In depth Pictures
Product Parameters
|
No |
Item |
Data |
|
one |
Go over Rubber quality |
8MPA,10MPA,12MPA,15MPA |
|
two |
Belt width (mm) |
four hundred,five hundred,600.650,seven-hundred,900,800,1000,1200 |
|
three |
Tensile strength |
EP200/2,EP315/two,EP315/3,EP400/three,EP500/three,EP600/3,EP400/four,EP500/four,EP630/4,EP800/four,EP1000/four,EP500/five,EP600/five,EP750/five, |
|
4 |
Best+Base thickness |
three+1.5, four+two, 4+one.5, 4+three, 5+one.5, 6+two, seven+two, 8+two |
|
five |
Belt thickness |
4mm-25mm |
|
6 |
Belt length |
50m, 100m, 200m, 250m, 300m |
|
seven |
Belt edge kind |
moulded(rubbered) edge or reduce edge |
| Fabric specs | Ply thickness (mm/p) | Strength series (N/mm) | Cover Thickness (mm) | Width | Size | |||||
| 2ply | 3ply | 4ply | 5ply | 6ply | Best | Base | mm | m | ||
| EP80 | .60 | one hundred sixty | 240 | 320 | 400 | 480 | 2.–eight | –four.five | 400-2500 | ≤300 |
| EP100 | .75 | 200 | 300 | four hundred | five hundred | 600 | ||||
| EP150 | 1.00 | three hundred | 450 | 600 | 750 | 900 | ||||
| EP200 | 1.ten | four hundred | 600 | 800 | 1000 | 1200 | 500 — 2500 | |||
| EP250 | one.twenty five | five hundred | 750 | 1000 | 1250 | 1500 | ||||
| EP300 | one.35 | 600 | 900 | 1200 | 1500 | 1800 | ||||
| EP350 | 1.45 | 1050 | 1400 | 1750 | 2100 | 800 — 2500 | ||||
| EP400 | 1.55 | 1600 | 2000 | 2400 | 1000 — 2500 | |||||
| EP500 | one.70 | 2000 | 2500 | 3000 | ||||||
Creation Procedure
1. Rubber combine process
2. Calender process
3. Forming process
4. Vulcanizing process
five. Complete goods
Good quality Inspection
We have special QC department to inpect all the conveyor belt just before shipment.
1. Area Inspection
1.1 Width measurement
1.two Length measurement
one.three Thickness measurement
one.4 Surface inspection
two. Lab Inspection
2.1 Adhesion energy check
two.2 Tensile power examination
two.3 Abrasion test
2.four Elongation examination
two.five Especial take a look at according to customer’s requirements
Packaging & Shipping
Successful Project
FAQ
Q1. Are you a manufactuer?
Sure, we produce Rubber conveyor belts and conveyor rollers more than twenty a long time.
Q2. What is the guide time?
ten days for bulk purchase manufacturing.
thirty days for container purchase creation.
Q3. How to shell out?
1. T/T or L/C by means of bank account
This fall. How about package deal?
one. Interior is packed on round rubber core with 30cm diameter and 12cmx12cm square gap
two. Outer is packed with one particular ply water-evidence PP material
three. With metal pallet on the bottom
