LQ3300 Vertical Glass washing and drying machine

Purpose:
The device has glass feed segment, glass washing and drying part, light inspection part.
2. The 1st segment is geared up with LOW-E glass check program. When the coated aspect is wrongly set, the technique will give alarm and the express will cease instantly.
3.A few pairs of brushes driven separately by 3 motors. Brushes thread are imported soft material, particular for LOW-E glass.
4. Washing section uses SKF brand name oil-totally free and drinking water-proof bearings. It will not trigger second contamination to glass.
5. Static electrical power get rid of system is geared up at the finish of washing part. It can remove the static electric power of the glass so the dust will not drop on the glass.
six. Washing pace is managed by an inverter.
 
Secotion1: Feed Section:
 
The back board is large density board with film
  It is the very first part of the line and its main function is to transmit the glass to the washing and drying area. The transmission is carried out by chains driven by the motor and the transmission pace is stable. It operates at the identical pace of the washing and drying section and the pace can be altered by the inverter. It can steer clear of the again board bending and deformation, also can water-resistant, avoid acid-base.
 

 LOW-E glass computerized diagnosis technique: it can easily know whether or not low-E glass putting is correct or not. When is improper, the alarm will elevate the alarm, and worker can adjust it immediately. 
 
Section2:Washing and Drying Part:
Washing part:
  This portion has a few pairs of brushes (the material is substantial -temperature nylon wire ) and a pair of sponge roller. The brushes are driven by a few synchronous motors individually and the motion is stable. A few pairs of tubular rollers variety of hair brushes, use Substantial Temperature Resistant and gentle mother nature hair brush, fully guaranteed the coating glass particularly the Reduced-E glass layer stratification are unable to be destroyed. 
one. It adopts custom-manufactured and imported nylon, entrance is a few pairs of comfortable brushes (Φ0.07mm), again is a few pairs of tough brushes (φ0.10mm),it last the brushes daily life.
two. According to the glass thickness, routinely handle the spacing of the drag roller, it doesn’t want any other manual adjustment for the glass that have diverse thickness in the adjustable scope by bearings.

Drying element: the air enters into the air knife from the leading. The distance among the air knife and the glass must be modified in accordance to the thickness of the glass in purchase to promise the drying result. Air passage adopts the most sophisticated design and enhance the drying velocity and productivity.
1. There is a pair of rhombic air knife, the entrance air knife can modify backward or CZPT in accordance the glass thickness. The blower, which is equipped with heater, blows strong very hot wind also it is equipped with infrared heater that can dry the equally sides of the glass swiftly.
2. The dry part utilizes the high top quality stainless metal, all of them are anti-corrosive content (like air knife, transfer gantry).
 
Section3: Changeover and Unloading Section:
   This part is employed to transmit and shop the glass to boost the work efficiency Light inspection is geared up with a foot switch. You can cease the express and check the washing quality.
* Prime opening and overturning platform (tilting table) is optional.

CZPT parameter:

Major Elements Brand

Packaging & Shipping and delivery

Set up: If the buyer requirements, the seller will ship 1 or two professionals (1 is electrical engineer, 1 is mechanical engineer) to install the devices and help teach the workers. 
Warranty time: Usually one particular calendar year. It is negotiable.
 

Speak to Us

Welcome to check out our factory!